Skip to content

VyOS Open-Source Network Router Crash Course

Complete guide to VyOS, the open-source network OS, from installation through BGP, WireGuard, firewalls, and availability.

Artikel ini belum diterjemahkan. Isi berikut berbahasa Inggris. Buka versi asli bahasa Inggris.

VyOS Crash Course

VyOS is an open-source network operating system based on Debian. It provides a unified CLI for routing, firewall, VPN, NAT, and more — similar to Juniper JunOS or Cisco IOS but running on standard x86 hardware or VMs.

If you’ve ever used EdgeOS (Ubiquiti EdgeRouter), you already know VyOS — EdgeOS is a fork. VyOS is the upstream, community-maintained original.

Why VyOS?

vs. VyOS wins because
pfSense/OPNsense CLI-first, declarative config, commit/rollback, API-ready
MikroTik RouterOS Linux under the hood, standard tooling, no license tiers
Cisco/Juniper Free, runs on any x86, same routing concepts
iptables/nftables Unified config syntax, zone-based firewall, stateful commit

What you’ll learn

  1. Installation — ISO, cloud images, VPS deployment
  2. Basic Configuration — hostname, users, interfaces, SSH
  3. NAT & Firewall — zone-based firewall, source NAT, port forwarding
  4. DHCP & DNS — DHCP server, DNS forwarding, dynamic DNS
  5. VPN — WireGuard, IPsec IKEv2, site-to-site and road warrior
  6. Routing — static routes, BGP, OSPF
  7. High Availability — VRRP, config sync, stateful failover
  8. Configuration Backup with Git — auto-backup config on every commit
  9. Image Automation — custom ISO builds, cron pipelines, CI/CD
  10. Syslog to Graylog — centralized logging, Grok extractors, dashboards

Release tracks

Channel Version Status Access
Rolling 1.5 Circinus Active development Free
Stream 1.5 (quarterly) LTS preview, stable Free
LTS 1.4 Sagitta Current LTS Contributor/paid
LTS (old) 1.3 Equuleus Maintenance only Contributor/paid

This guide targets VyOS 1.4/1.5. Configuration syntax differs from 1.3 (Equuleus). The historical 1.3 migration URL returned HTTP 404 on 2026-11-05. No equivalent migration guide was confirmed. The official 1.4 image-update guide describes image management, not complete 1.3 configuration migration. Obtain version-specific migration and recovery guidance from the VyOS maintainer before upgrading a 1.3 installation.

Quick reference

# Enter configuration mode
configure

# Set hostname
set system host-name vyos-router

# Commit and save
commit
save

# Exit configuration mode
exit

# Show current config
show configuration

# Show version
show version

Ketik untuk mencari…

↑↓ navigasi↵ pilihEsc tutup