Skip to content

VPN — WireGuard & IPsec

Build site-to-site and road-warrior VPNs with WireGuard and IPsec IKEv2 on VyOS, with notes on when to use each protocol.

Artikel ini belum diterjemahkan. Isi berikut berbahasa Inggris. Buka versi asli bahasa Inggris.

VPN: WireGuard & IPsec

Version key: 🟢 = 1.3+ · 🟡 = 1.4+ · 🟣 = 1.5+

VyOS supports both WireGuard (kernel-native, fast, simple) and IPsec/IKEv2 (standards-compatible, broad client support). Choose based on your needs:

WireGuard IPsec IKEv2
Performance Excellent (in-kernel) Very good (hardware offload)
Complexity Minimal — key exchange only Complex — IKE, ESP, certificates
Roaming Built-in (stateless) MOBIKE (IKEv2 extension)
Client support All major OS Native on iOS/macOS/Windows
Site-to-site Excellent Excellent
Port UDP 51820 (default) UDP 500, 4500 + ESP

WireGuard 🟢 1.3+

Site-to-Site

Two VyOS routers connected over WireGuard:

Router A (192.168.1.0/24) — public IP 203.0.113.10:

# Generate keys
generate wireguard key-pair

# Configure tunnel
set interfaces wireguard wg01 description 'Site-to-Site B'
set interfaces wireguard wg01 address 10.255.254.1/30
set interfaces wireguard wg01 peer site-b allowed-ips 192.168.2.0/24
set interfaces wireguard wg01 peer site-b public-key '<RouterB-public-key>'
set interfaces wireguard wg01 peer site-b endpoint 198.51.100.20:51820
set interfaces wireguard wg01 private-key '<RouterA-private-key>'
set interfaces wireguard wg01 port 51820

# Route to remote LAN
set protocols static route 192.168.2.0/24 interface wg01

Router B (192.168.2.0/24) — public IP 198.51.100.20:

set interfaces wireguard wg01 description 'Site-to-Site A'
set interfaces wireguard wg01 address 10.255.254.2/30
set interfaces wireguard wg01 peer site-a allowed-ips 192.168.1.0/24
set interfaces wireguard wg01 peer site-a public-key '<RouterA-public-key>'
set interfaces wireguard wg01 peer site-a endpoint 203.0.113.10:51820
set interfaces wireguard wg01 private-key '<RouterB-private-key>'
set interfaces wireguard wg01 port 51820

set protocols static route 192.168.1.0/24 interface wg01

Road Warrior (Client VPN)

Allow laptops/phones to connect into your network:

# VyOS server side
set interfaces wireguard wg02 description 'Road Warrior VPN'
set interfaces wireguard wg02 address 10.255.255.1/24
set interfaces wireguard wg02 private-key '<server-private-key>'
set interfaces wireguard wg02 port 51821

# Peer: laptop
set interfaces wireguard wg02 peer laptop allowed-ips 10.255.255.10/32
set interfaces wireguard wg02 peer laptop public-key '<laptop-public-key>'

# Peer: phone
set interfaces wireguard wg02 peer phone allowed-ips 10.255.255.20/32
set interfaces wireguard wg02 peer phone public-key '<phone-public-key>'

Client config (laptop):

[Interface]
PrivateKey = <laptop-private-key>
Address = 10.255.255.10/32
DNS = 192.168.1.1

[Peer]
PublicKey = <server-public-key>
Endpoint = 203.0.113.10:51821
AllowedIPs = 192.168.1.0/24, 10.255.255.0/24

Firewall for WireGuard

# Allow WireGuard on WAN
set firewall ipv4 name WAN-to-LOCAL rule 40 action accept
set firewall ipv4 name WAN-to-LOCAL rule 40 destination port 51820,51821
set firewall ipv4 name WAN-to-LOCAL rule 40 protocol udp

# If you want road warriors to reach LAN
set firewall ipv4 name WAN-to-LAN rule 20 action accept
set firewall ipv4 name WAN-to-LAN rule 20 source address 10.255.255.0/24
set firewall ipv4 name WAN-to-LAN rule 20 destination address 192.168.1.0/24

IPsec IKEv2 🟢 1.3+

Site-to-Site with Pre-Shared Key

# Router A
set vpn ipsec esp-group ESP-AES256 proposal 1 encryption aes256
set vpn ipsec esp-group ESP-AES256 proposal 1 hash sha256
set vpn ipsec esp-group ESP-AES256 lifetime 3600

set vpn ipsec ike-group IKE-AES256 proposal 1 encryption aes256
set vpn ipsec ike-group IKE-AES256 proposal 1 hash sha256
set vpn ipsec ike-group IKE-AES256 proposal 1 dh-group 14
set vpn ipsec ike-group IKE-AES256 lifetime 28800

set vpn ipsec site-to-site peer 198.51.100.20 authentication mode pre-shared-secret
set vpn ipsec site-to-site peer 198.51.100.20 authentication pre-shared-secret 'Str0ngPSK!'
set vpn ipsec site-to-site peer 198.51.100.20 ike-group IKE-AES256
set vpn ipsec site-to-site peer 198.51.100.20 default-esp-group ESP-AES256
set vpn ipsec site-to-site peer 198.51.100.20 local-address 203.0.113.10

set vpn ipsec site-to-site peer 198.51.100.20 tunnel 1 \
  local prefix 192.168.1.0/24
set vpn ipsec site-to-site peer 198.51.100.20 tunnel 1 \
  remote prefix 192.168.2.0/24

Road Warrior with Certificate Auth

# Certificate-based IKEv2 (simplified)
set vpn ipsec esp-group ESP-AES256 proposal 1 encryption aes256
set vpn ipsec esp-group ESP-AES256 proposal 1 hash sha256

set vpn ipsec ike-group IKE-AES256 proposal 1 encryption aes256
set vpn ipsec ike-group IKE-AES256 proposal 1 hash sha256
set vpn ipsec ike-group IKE-AES256 proposal 1 dh-group 14

# Remote access pool
set vpn ipsec remote-access pool ra-pool prefix 10.255.253.0/24
set vpn ipsec remote-access pool ra-pool name-server 192.168.1.1

# CA and server certificate
set vpn ipsec authentication pki ca VyOS-CA certificate '<ca-cert>'
set vpn ipsec authentication pki server vyos-server certificate '<server-cert>'
set vpn ipsec authentication pki server vyos-server private key '<server-key>'

# Remote access connection
set vpn ipsec remote-access connection ra-vpn authentication server-certificate vyos-server
set vpn ipsec remote-access connection ra-vpn authentication client-certificate require
set vpn ipsec remote-access connection ra-vpn authentication ca-certificate VyOS-CA
set vpn ipsec remote-access connection ra-vpn ike-group IKE-AES256
set vpn ipsec remote-access connection ra-vpn esp-group ESP-AES256
set vpn ipsec remote-access connection ra-vpn local-address 203.0.113.10
set vpn ipsec remote-access connection ra-vpn pool ra-pool

IPsec Firewall Rules

# Allow IKE and ESP/NAT-T
set firewall ipv4 name WAN-to-LOCAL rule 50 action accept
set firewall ipv4 name WAN-to-LOCAL rule 50 destination port 500
set firewall ipv4 name WAN-to-LOCAL rule 50 protocol udp

set firewall ipv4 name WAN-to-LOCAL rule 51 action accept
set firewall ipv4 name WAN-to-LOCAL rule 51 destination port 4500
set firewall ipv4 name WAN-to-LOCAL rule 51 protocol udp

set firewall ipv4 name WAN-to-LOCAL rule 52 action accept
set firewall ipv4 name WAN-to-LOCAL rule 52 protocol esp

Which VPN to choose?

Choose WireGuard when:
  ✓ Simplicity matters
  ✓ Linux/Unix-heavy environment
  ✓ Maximum throughput needed
  ✓ NAT traversal not critical

Choose IPsec when:
  ✓ iOS/macOS/Windows native client needed
  ✓ Corporate/enterprise standards required
  ✓ Hardware crypto offload available
  ✓ Need to interoperate with non-Linux peers

Personally, I use WireGuard for site-to-site and personal devices, IPsec only when a client platform can’t do WireGuard.

Verify

# WireGuard
show interfaces wireguard wg01
show interfaces wireguard wg01 peer site-b
show interfaces wireguard statistics

# IPsec
show vpn ipsec sa
show vpn ipsec status
show vpn ipsec statistics

Next

Routing →

Ketik untuk mencari…

↑↓ navigasi↵ pilihEsc tutup